Bridge Wireless

1. WDS feature
2. Using EoIP

Bridge di Wireless

Create a bridge interface on AP and add ether1 interface to the bridge in WinBox

Do the same on the Station, and add ether1, wlan1 interfaces to the bridge in Winbox

Make sure you have communication between MikroTik routers, i.e., one router is configured as server (AP), the other one as client (station). Configure wireless interface wlan1 on AP in WinBox

Do the same configuration on Client wireless interface (wlan1) in winbox

Create wds interface on AP and add the interface to the bridge in Winbox

Check whether the WDS link is established in Winbox

Add IP address on AP in WinBox

• [admin@AP]> ip address add address=10.1.0.215/24 interface=wds-bridge
• [admin@Station]> ip address add address=10.1.0.215/24 interface/24 interface=wds-bridge
• NOTE: If not using NAT/MANGLE nor anythingdoing with conntrack, remember to turn of it at both link ends.
• In the console:
• [admin@xx]> ip firewall connection tracking setenabled=no
• This will help you get the full bandwidth the wireless link can achive freeing the CPU load.